Curry’s Essentials (CDW60W13) filling & emptying

[aqua_serve]

Guys,

I’m hoping one of you might be able to point me in the right direction regarding this machine.

I changed the heater element on the machine as it had blown, I tested the dishwasher with the bottom off and everything was working. After replacing the bottom panel the machine now fills and empties continually. I’ve found a ‘service sheet’ on here which was pretty poor. Parts seem none existent too. Any advice as to what to look for on this machine would be greatly appreciated.

Yours,

Mark

[electrofix]

Re: Curry’s Essentials (CDW60W13) filling & emptying

if you now remove the botton panel does it work properly again ?

Dave

[gandh1]

Re: Curry’s Essentials (CDW60W13) filling & emptying

if the aquastop isnt pushed up in the base, check the side air chamber matrix, as im presuming you would have laid it on its back, so due to the crap design water can get sometimes get stuck in there and make it think its overfilled/do weird and wonderful things.

[Author]

Posts