Beko OIF21300B (single oven)

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Beko OIF21300B (single oven)

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • October 30, 2015 at 6:11 pm #86529
    rocker
    Participant

    Called today, found fan blade hitting the circular oven element, the blade clearance against heater when cold is about 1mm to 2mm. when hot clipping element, I was thinking of putting a smaller blade on fan.
    As anyone come across this issue and can advise of best option please. John

    October 30, 2015 at 6:39 pm #432047
    johnnyj
    Participant

    Re: Beko OIF21300B (single oven)

    I’ve done that a few times with comebacks, JJ

    October 30, 2015 at 6:57 pm #432048
    Lawrence
    Participant

    Re: Beko OIF21300B (single oven)

    Change fan motor ,blade and element

    October 31, 2015 at 10:33 am #432049
    rocker
    Participant

    Re: Beko OIF21300B (single oven)

    Thanks for your reply Gents. John

    October 31, 2015 at 1:58 pm #432050
    Seamy
    Participant

    Re: Beko OIF21300B (single oven)

    Lawrence wrote:Change fan motor ,blade and element

    Found that a belling fan blade does the job, let me out anyhow on one occasion.

    October 31, 2015 at 3:58 pm #432051
    rocker
    Participant

    Re: Beko OIF21300B (single oven)

    Seamy, do you know the part number please.

    November 2, 2015 at 6:50 pm #432052
    Seamy
    Participant

    Re: Beko OIF21300B (single oven)

    081581800
    if you look at picture of this common fan motor, the fan blade can be used to let you out of a hole, not as big & wont catch on element.

    http://shop.ukwhitegoods.co.uk/mrt307-c … -fan-motor

    November 2, 2015 at 8:16 pm #432053
    rocker
    Participant

    Re: Beko OIF21300B (single oven)

    Cheers Seamy, have a spare one in car.

    January 7, 2016 at 10:22 am #432054
    Tom
    Participant

    Re: Beko OIF21300B (single oven)

    I’ve got an oven with this problem, fan blade catching the element.
    It is clearing the newly replaced element but only just.
    The motor needs replacing too but is supplied without the circulation fan blade.
    Noticed Seamy’s post with part number— 081581800.
    I am finding that this comes as a belling fan motor but no circulation fan is shown.
    I have belling circulation fan blades in stock but they are quite a bit smaller than the original Beko.
    I ‘me wondering if you were referring to a blade a bit nearer the size of the beko but the there was an error in the part number supplied.
    Thanks in advance for any replies / comments.
    Tom

    January 14, 2016 at 7:16 pm #432055
    Seamy
    Participant

    Re: Beko OIF21300B (single oven)

    Tom wrote:I’ve got an oven with this problem, fan blade catching the element.
    It is clearing the newly replaced element but only just.
    The motor needs replacing too but is supplied without the circulation fan blade.
    Noticed Seamy’s post with part number— 081581800.
    I am finding that this comes as a belling fan motor but no circulation fan is shown.
    I have belling circulation fan blades in stock but they are quite a bit smaller than the original Beko.
    I ‘me wondering if you were referring to a blade a bit nearer the size of the beko but the there was an error in the part number supplied.
    Thanks in advance for any replies / comments.
    Tom

    Part number refers to a common Belling fan motor that most Engineers would stock, it comes with a fan blade & fan motor, just use the fan blade out of the Belling box which is not as large & doesn’t run tight to element.

    January 15, 2016 at 10:01 am #432056
    Tom
    Participant

    Re: Beko OIF21300B (single oven)

    Thanks for confirming this Seamy.
    I have the Belling motor & fan.
    tom

    January 15, 2016 at 11:49 am #432057
    Lawrence
    Participant

    Re: Beko OIF21300B (single oven)

    The other thing to be aware of is the new fan motors have an earth tag on the bracket that isn’t used ,in some cases we have had a vibration through the back panel after fitting a new motor and fan.
    Just remove the tag and it goes away

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.