- This topic has 6 replies, 2 voices, and was last updated 10 years, 4 months ago by
.
-
Posts
-
hi all this one starts up ok but within 5 seconds of the initial drain it goes into a fast spin for 3 seconds then stops no lights flashing just stays with the wash led on , thanks
Re: beko WMB 51021W drains for 5 seconds 3 second spin
sounds like motor tacho magnet or motor triac
Dave
Re: beko WMB 51021W drains for 5 seconds 3 second spin
Hi Dave mchecked tacho generator continuity there and intermittent when turning the shaft i take it thats ok , the triac is gonna be a new board i guess and at 70 euros i could take a chance cheers mate
Re: beko WMB 51021W drains for 5 seconds 3 second spin
no you can pinch a triac of a scrap board and see what happens. if you can solder its easy
Dave
Re: beko WMB 51021W drains for 5 seconds 3 second spin
Yeah no problem with the solder Dave but I don’t have any Beko boards is the triac the flat rectangular component sometimes a small hole I. The side with 3 legs ?
Sent from my HTC One mini 2 using Tapatalk
Re: beko WMB 51021W drains for 5 seconds 3 second spin
yes all washer boards have them use hotpoint one or zanussi one most will swop and work no probs
Dave
- You must be logged in to reply to this topic.