beko WMB 51021W drains for 5 seconds 3 second spin

[slyp98]

hi all this one starts up ok but within 5 seconds of the initial drain it goes into a fast spin for 3 seconds then stops no lights flashing just stays with the wash led on , thanks

[electrofix]

Re: beko WMB 51021W drains for 5 seconds 3 second spin

sounds like motor tacho magnet or motor triac

Dave

[slyp98]

Re: beko WMB 51021W drains for 5 seconds 3 second spin

Hi Dave mchecked tacho generator continuity there and intermittent when turning the shaft i take it thats ok , the triac is gonna be a new board i guess and at 70 euros i could take a chance cheers mate

[electrofix]

Re: beko WMB 51021W drains for 5 seconds 3 second spin

no you can pinch a triac of a scrap board and see what happens. if you can solder its easy

Dave

[slyp98]

Re: beko WMB 51021W drains for 5 seconds 3 second spin

Yeah no problem with the solder Dave but I don’t have any Beko boards is the triac the flat rectangular component sometimes a small hole I. The side with 3 legs ?

Sent from my HTC One mini 2 using Tapatalk

[electrofix]

Re: beko WMB 51021W drains for 5 seconds 3 second spin

yes all washer boards have them use hotpoint one or zanussi one most will swop and work no probs

Dave

[slyp98]

Re: beko WMB 51021W drains for 5 seconds 3 second spin

Cheers

Sent from my HTC One mini 2 using Tapatalk

[Author]

Posts