- This topic has 3 replies, 3 voices, and was last updated 10 years, 4 months ago by
.
Viewing 4 posts - 1 through 4 (of 4 total)
-
Posts
-
Re: beko dsc64w dryer
did pm you some info but
top stat on element is an ntc as a test get an old hotpoint heater ntc and swop the wires onto it. making sure it cant touch anything and with the back still off, select a timed dry programme and see if you can feel heat. if yes change the element
Dave
Re: beko dsc64w dryer
heater ntc 19500kohm at 25 centegrade door ntc 1200 ohm 25 centegrade too far out and no heat
wilf
Viewing 4 posts - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.