beko dsc64w dryer Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › beko dsc64w dryer This topic has 3 replies, 3 voices, and was last updated 10 years, 4 months ago by kwaremont. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts December 4, 2015 at 4:18 pm #86919 kwaremontParticipant hi no heat on this dryer element & stats ok any one know how to get the test cycle on this thanks, December 6, 2015 at 10:25 am #433396 electrofixModerator Re: beko dsc64w dryer did pm you some info but top stat on element is an ntc as a test get an old hotpoint heater ntc and swop the wires onto it. making sure it cant touch anything and with the back still off, select a timed dry programme and see if you can feel heat. if yes change the element Dave December 7, 2015 at 11:01 am #433397 wilfParticipant Re: beko dsc64w dryer heater ntc 19500kohm at 25 centegrade door ntc 1200 ohm 25 centegrade too far out and no heat wilf December 8, 2015 at 12:51 pm #433398 kwaremontParticipant Re: beko dsc64w dryer thanks everyone Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In