WM560P

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › WM560P

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • December 7, 2015 at 3:54 pm #86944
    Lawrence
    Participant

    Ordered in a tub for this one (only tub listed on connect) only to find its separate rear half.
    does anyone have a breakdown they can send me or the correct part nos

    December 7, 2015 at 4:01 pm #433466
    iadom
    Moderator

    Re: WM560P

    No such model number Lawrence?

    December 7, 2015 at 4:10 pm #433467
    iadom
    Moderator

    Re: WM560P

    The WML560 can have either split or welded drum, commercial code needed to identify.

    December 7, 2015 at 4:26 pm #433468
    Lawrence
    Participant

    Re: WM560P

    WMF560P sorry ,am trying to get the code

    December 7, 2015 at 4:35 pm #433469
    iadom
    Moderator

    Re: WM560P

    WMF560PUK or WMF560PUK.R

    First one has split drum, rear half is C00144137.

    Second one has welded drum.

    December 7, 2015 at 4:40 pm #433470
    Lawrence
    Participant

    Re: WM560P

    My engineer says Code 54514 if that helps

    December 7, 2015 at 4:56 pm #433471
    iadom
    Moderator

    Re: WM560P

    That is the correct code for the WMF560PUK, rear half part number above.
    If it is a bearing failure then it is possible to change just the bearings if caught early enough but it often needs drum rear half and drum support shaft which is C00264725.

    Jim.

    December 7, 2015 at 4:57 pm #433472
    Lawrence
    Participant

    Re: WM560P

    absolutely collpased apparently ,thanks Jim

    December 7, 2015 at 5:02 pm #433473
    Lawrence
    Participant

    Re: WM560P

    hmm no one finds the shaft part number

    December 7, 2015 at 5:38 pm #433474
    iadom
    Moderator

    Re: WM560P

    Recognised at Masterpart but out of stock as usual.:(
    Damned if I can remember the old GDA number, unfortunately Partfinder no longer shows that particular one.

    Just double checked and for some reason that drum support has a different part number to the original 35MM drum support, possibly due to the machine being a larger capacity.

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.