WM560P

[Lawrence]

Ordered in a tub for this one (only tub listed on connect) only to find its separate rear half.
does anyone have a breakdown they can send me or the correct part nos

[iadom]

Re: WM560P

No such model number Lawrence?

[iadom]

Re: WM560P

The WML560 can have either split or welded drum, commercial code needed to identify.

[Lawrence]

Re: WM560P

WMF560P sorry ,am trying to get the code

[iadom]

Re: WM560P

WMF560PUK or WMF560PUK.R

First one has split drum, rear half is C00144137.

Second one has welded drum.

[Lawrence]

Re: WM560P

My engineer says Code 54514 if that helps

[iadom]

Re: WM560P

That is the correct code for the WMF560PUK, rear half part number above.
If it is a bearing failure then it is possible to change just the bearings if caught early enough but it often needs drum rear half and drum support shaft which is C00264725.

Jim.

[Lawrence]

Re: WM560P

absolutely collpased apparently ,thanks Jim

[Lawrence]

Re: WM560P

hmm no one finds the shaft part number

[iadom]

Re: WM560P

Recognised at Masterpart but out of stock as usual.:(
Damned if I can remember the old GDA number, unfortunately Partfinder no longer shows that particular one.

Just double checked and for some reason that drum support has a different part number to the original 35MM drum support, possibly due to the machine being a larger capacity.

[Author]

Posts