Washing machine Bosch Maxx 5

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Washing machine Bosch Maxx 5

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 12, 2015 at 12:23 am #87007
    Derek Carter
    Participant

    Bosch Maxx 5 WAA 241 66GB
    I have successfully replaced the door seal, but on first empty test I still have some rubber degradation on the seal. I think the drum and outer tube may be out of kilter. Diagnosis and cure please.

    December 12, 2015 at 12:39 am #433659
    electrofix
    Moderator

    Re: Washing machine Bosch Maxx 5

    from what you describe the inner drum is catching the door seal and i guess you have replaced it because of this problem
    this range of machine is known for this problem being the cheaper machine at the lower end of the market

    if so scrap it time for a new one. drum spider has corroded and snapped

    Dave

    December 13, 2015 at 7:17 pm #433660
    DixonsDan
    Participant

    Re: Washing machine Bosch Maxx 5

    I’ve had this with a few Electrupart door seal on Bosch. Found it best to get genuine Bosch seal.

    December 13, 2015 at 7:36 pm #433661
    Martin
    Participant

    Re: Washing machine Bosch Maxx 5

    DixonsDan wrote:Found it best to get genuine Bosch seal.

    It’s a Bosch WAA Dan, I’m with Electrofix on this one, the drum shaft is a gonna no matter what door boot was fitted.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.