Beko DCU8230

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko DCU8230

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • December 17, 2015 at 11:18 pm #87070
    Hollytree_Technical
    Participant

    Hi All

    Industrial Code: 7189041200

    I have just had to change an element due to IR fault on the NTC but the dryer won’t heat.

    Can anyone tell me if there are any technical bulletins etc available on this machine, I am specifically wondering about the heating element and temperature sensors as I have found snippets that suggest there may be a sensor change which may or may not require a different PCB.

    Any other technical Info for this machine will be greatly appreciated.

    Thank you

    Jem

    January 4, 2016 at 8:08 pm #433879
    Seamy
    Participant

    Re: Beko DCU8230

    Sometimes short circuit on the NTC of heating element takes out P.C.B so that may need replacing. New heaters now have better design of NTC, its not needed to change P.C.B just for new style heater, but as previously stated original faulty NTC may have taken out board.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.