LG Washing Machine problem

Home › Forums › Public Support Forums › General Enquiries And Questions › LG Washing Machine problem

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 24, 2015 at 1:37 pm #87128
    steeno69
    Participant

    Hi There
    Was hoping for advice on here
    Had a drainage issue with my LG washer

    Did all the usual:
    Checked drain
    Checked pipes
    Took washer apart
    Checked filter
    Checked drain hose (that was blocked and cleared)
    Checked the large pipe from drum (removed a few coins)
    Took out pump Tested and works fine

    It’s like the bugger hates me so not sure where else to look..

    Is there a potential other issue that I’m missing?

    There are the pipes leading from the pump to main drain I blew through and no blockage there .

    Help (if possible?)

    Thanks a Mill

    Alan
    :con:

    December 24, 2015 at 3:00 pm #434032
    electrofix
    Moderator

    Re: LG Washing Machine problem

    you cant test the pump without water in it. if pump is powering but not starting its the pump. these pumps can stert with small omounts of water in but fail when its full

    Dave

    December 26, 2015 at 1:42 pm #434033
    steeno69
    Participant

    Re: LG Washing Machine problem

    Just checking the pump spins but not pumping the water out… guessing that means it is the pump then (I hope) no sign of any other blockages

    Also Just checking that only one of the pumps spins (the left hand one) the right hand one I am assuming this is for recirculation.

    Thanks Dave for your reply.
    Im happy enough if it’s just the pump so at least I can replace easy enough myself rather than get call out from engineer

    December 26, 2015 at 2:04 pm #434034
    steeno69
    Participant

    Re: LG Washing Machine problem

    ordered the pump part mate so fingers crossed 🙂 worth punting £16 on this to get it working 🙂

    Fingers crossed

    Al

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.