Hi all. My TB AW1001W just doesnt want to start. I have searched the previous fault posts but cant see anything that I can use to fix this problem. If I get the diagnostic lights to flash by holding down the start button and the adjacent button with a programme selected I get the Start and End lights flashing together once then the End light alone flashes a further 4 times and repeated. Help!
Thanks
Hi all, update.
As none has yet come up with a fix for this problem I pulled out the washer and had a general basic check over and spray of WD40 on connectors.
When I try to run it now the End light flashes 11 times…….. 😕
Hi kwatt, thanks for the help.
Yesterday before my fiddle with it it would do a diagnostic sequential flash of all the lights and the start and end light sequence I mentioned now ALL it will do is flash End 11 times. Even without pressing any buttons. Just turn the dial to select any program and you get 11 flashes. Any ideas short of a gallon of petrol?