Flap doors for Scandinova upright freezer UF 97 S

Home › Forums › Public Support Forums › Help And Support › Fridge And Freezer Forum › Flap doors for Scandinova upright freezer UF 97 S

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • March 28, 2005 at 6:07 pm #8725
    Rob.morris
    Participant

    I have the above freezer but the bottom lugs on two of the flap down shelf draws have broken away; each time the main door is opened the doors fall down and open. Does anyone know where I can get new ones???
    Thanks
    RM

    March 28, 2005 at 6:58 pm #130168
    admin
    Keymaster

    Re: Flap doors for Scandinova upright freezer UF 97 S

    Hi

    Is it the lugs on the flap itself or is it the plastic peices that are on either side of the freezer wall that the flap fits into ?

    This is a common problem and has been for at least 8 yrs.

    bryan :wave:

    March 28, 2005 at 9:05 pm #130169
    Rob.morris
    Participant

    Re: Flap doors for Scandinova upright freezer UF 97 S

    Bryan
    Thanks for the speedy reply!
    It’s the bottom pair of the two sets of lugs on the flaps; the side bits on the freezer wall are ok.
    I think I will have to replace both of the broken flaps, do you know how I can get replacements?
    Thanks
    Rob M

    March 28, 2005 at 9:41 pm #130170
    Dave_Conway
    Participant

    Re: Flap doors for Scandinova upright freezer UF 97 S

    It looks like an obscure one made for Comet (Scandinova is one of their own brand names).

    Spares only from them by the looks of it http://www.cometspares.co.uk unless Bryan knows any different.

    Dave.

    March 29, 2005 at 6:08 am #130171
    whitegoodsman
    Participant

    Re: Flap doors for Scandinova upright freezer UF 97 S

    this product was made by vestfrost if send me all the info of moel number product code i see if i can them from vestfrost

    March 29, 2005 at 11:30 am #130172
    Rob.morris
    Participant

    Thank you all v much. I have found replacements at the comet site (although expensive for what appears to be a simple bit of kit!
    Rob M

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.