Candy CIC60

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Candy CIC60

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 29, 2005 at 2:24 pm #8738
    admin
    Keymaster

    When turned on the Clean Filter Indicator on the front lights up. The machine continues through the cycle but with no heat. The filter and condenser are clean and clear of any blockage. The heating element at the rear is OK and all parts cleaned as new. The motor is OK and there are no unusual noises or funny smells.

    March 29, 2005 at 2:32 pm #130202
    Martin
    Participant

    Re: Candy CIC60

    Mike B,

    Are you 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure the heating element and the supply to it are OK? I suspect not….do please also read this thread on the same subject:-
    http://www.ukwhitegoods.co.uk/modules.p … pic&t=4514

    Martin

    March 29, 2005 at 2:38 pm #130203
    Dave_Conway
    Participant

    Re: Candy CIC60

    MikeB wrote:Sorry forgot to say the machine is only 14 months old. Is this a common fault for Candy. If so what advise would any give in buying a new model for around £200. It does not have to be condensing. Given the reliability of this Candy model I do not think I will be happy with another one and given that the same manufacturer also supplies Hoover that rules them out too.

    Copied from a new post 😉

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.