- This topic has 6 replies, 3 voices, and was last updated 10 years, 2 months ago by
.
-
Posts
-
Hi
I am trying to replace the door seal on my CDA CI330IN washing machine. From what I can see online it would be best to remove the front panel; does anyone know how to do this? I took off the outer spring wire around the door seal but can’t see how to remove the inner wire connecting the door seal to the drum without removing the panel. There is a bolt visible with what looks like a locking nut but I can’t get a spanner in that gap!
Thanks in advance for any help
Chris
Re: CDA CI330IN front panel/door seal
Hi Chris,
You can’t get the front panel off because, it doesn’t come off. It’s welded to the casing per the diagram for it.
That’s the problem with generic videos etc… no specifics.
K.
Re: CDA CI330IN front panel/door seal
Well that’s a good reason it won’t come off!
OK I assume that there’s a knack to fitting these things and it must be possible by going in through the top. But fitting the wire to the drum must be pretty tricky.
Thanks for your reply. What a great resource!
Cheers
Chris
Re: CDA CI330IN front panel/door seal
Both hands in through the front or, from the top.
Fiddly but not too bad.
K.
Re: CDA CI330IN front panel/door seal
Do it all from the front. No magic tips I’m afraid but normally very easy
Re: CDA CI330IN front panel/door seal
There is a bolt with a spring on it that seems to provide the tension. Do I undo the bolt fully or just loosen it? Presume it’ll come off if I loosen it enough?
- You must be logged in to reply to this topic.