Siemens WM14S890GB/05 No Display

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Siemens WM14S890GB/05 No Display

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 9, 2016 at 5:42 pm #87548
    Taff543489
    Participant

    Went to this machine today. Customer reported that the machine was stuck in program with no display. Machine dead as a Haddock. Checked the usual confirmed power supply to front power card, but no supply out of board to the board behind when power switched on. I have fitted a new door interlock and carried out an insulation test, all good. Can anyone confirm my findings in that I suspect the front power card? Is anyone repairing the power cards?

    February 9, 2016 at 8:06 pm #435229
    Martin
    Participant

    Re: Siemens WM14S890GB/05 No Display

    Oh dear, only bad news I’m afraid as it’s likely as not the 120quid display board is at fault. Unless that is the connection between that and the power module is playing up, or worst still the power board?

    I think this machine is covered under the 5 year warranty? If so time to get BSH in.

    February 10, 2016 at 8:11 am #435230
    Taff543489
    Participant

    Re: Siemens WM14S890GB/05 No Display

    Many Thanks. I thought as much, as I had power in but none out. I just wanted confirmation.

    February 16, 2016 at 12:50 pm #435231
    Taff543489
    Participant

    Re: Siemens WM14S890GB/05 No Display

    Told the customer to call Siemens who replaced the said board at a cost of £80 call out. Customer well happy.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.