Beko WMB 61631S Power issue

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Beko WMB 61631S Power issue

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 20, 2016 at 2:07 pm #87656
    Hawkeye777
    Participant

    Hi Guy’s, just looking for a few pointers as to what my problem could be, currently having a problem on a Beko WMB 61631S washing machine which has power, goes through suppressor, main board, door lock, etc, all of which seem to be getting power, problem is the digital display unit does not power up, no lights what so ever on control panel, is this a main board issue or another component that maybe at fault to cause this, any advice would be appreciated.

    Regards

    Mark

    February 21, 2016 at 12:50 am #435569
    electrofix
    Moderator

    Re: Beko WMB 61631S Power issue

    with all power loss situation you have to check everything. you have to get a live and a neutral to the board for it to work. you said you had power everywhere but have you got a neutral

    Dave

    February 22, 2016 at 8:20 pm #435570
    Hawkeye777
    Participant

    Re: Beko WMB 61631S Power issue

    live and neutral going directly to on/off selection dial, all other components, door switch, brushes, heating element, check out fine.

    Mark

    February 23, 2016 at 8:23 am #435571
    Seamy
    Participant

    Re: Beko WMB 61631S Power issue

    P.C.B required

    March 2, 2016 at 9:24 pm #435572
    Hawkeye777
    Participant

    Re: Beko WMB 61631S Power issue

    Yes Seamy, your assumption was correct, deep down that was my initial thought as well but it was good to have other options to what could have been at fault as well, thanks for all the comments guy’s.

    Mark

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.