Beko WMB 61631S Power issue

[Hawkeye777]

Hi Guy’s, just looking for a few pointers as to what my problem could be, currently having a problem on a Beko WMB 61631S washing machine which has power, goes through suppressor, main board, door lock, etc, all of which seem to be getting power, problem is the digital display unit does not power up, no lights what so ever on control panel, is this a main board issue or another component that maybe at fault to cause this, any advice would be appreciated.

Regards

Mark

[electrofix]

Re: Beko WMB 61631S Power issue

with all power loss situation you have to check everything. you have to get a live and a neutral to the board for it to work. you said you had power everywhere but have you got a neutral

Dave

[Hawkeye777]

Re: Beko WMB 61631S Power issue

live and neutral going directly to on/off selection dial, all other components, door switch, brushes, heating element, check out fine.

Mark

[Seamy]

Re: Beko WMB 61631S Power issue

P.C.B required

[Hawkeye777]

Re: Beko WMB 61631S Power issue

Yes Seamy, your assumption was correct, deep down that was my initial thought as well but it was good to have other options to what could have been at fault as well, thanks for all the comments guy’s.

Mark

[Author]

Posts