Beko WMB91442 a/w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WMB91442 a/w

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 29, 2016 at 11:42 am #87971
    Penguin45
    Participant

    Hello chaps.

    Had cause to visit the above machine. Stuck on spin with display showing 20 mins to run. It appears to be stuck on an 18 second loop. Pump runs for 18 seconds, pause, repeat. No signs of life from the motor. It doesn’t count down and it won’t cancel. I’m assuming that there is a logic fault on the PCB – unless anyone can advise me differently?

    Thanks,

    Chris.

    March 29, 2016 at 12:07 pm #436637
    kwatt
    Keymaster

    Re: Beko WMB91442 a/w

    You have mail. Don’t know it it’ll be a lot of help though.

    K.

    March 29, 2016 at 6:53 pm #436638
    keithwilliams
    Participant

    Re: Beko WMB91442 a/w

    am i correct in thinking that the pcb in the motor is at fault. does anyone have a fix for these motors yet?

    July 1, 2017 at 3:50 pm #436639
    mjw1208
    Participant

    Re: Beko WMB91442 a/w

    Have a Beko wmb91442lr doing the same fault as above , stuck on spin showing 20 but wont countdown or clear .
    Is this a motor fault ? have checked the wiring in motor plug connections which appear to be ok .

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.