- This topic has 2 replies, 2 voices, and was last updated 10 years ago by
.
-
Posts
-
Hi all. I’m in a bit of a bind. I have recently acquired a beko dcu 9330 R condenser dryer. It’s LCD had bled but could still be read. I had The dryer on and then suddenly it knocked itself off mid cycle and won’t come back on. The drum light still comes on so I know it’s got power going to it.
The lint collector in the drum was bursting, the woman I got it off said she’d emptied it but I stupidly didn’t check!I’ve now emptied all lint, but the LCD/power won’t start the machine, rendering it dead apart from the drum light.
Does it have a reset switch? If so where?
I’ve tried unplugging it over night but still the same, I’ve changed the fuse just in case it was that but it’s not.
Any help/advice, I would be very grateful for.Thank you in advance 🙂
Re: Beko dcu 9330 R condenser dryer
have you checked the condenser is locked in
there is a red tab that has a switch on it and if its not locked it wont start
Dave
Re: Beko dcu 9330 R condenser dryer
Yeah everything is locked into place. I’ve went and plugged it back in tonight and it’s now come back on, I know there must be a fault somewhere but I don’t know what would cause it to just knock off and not come back on for days 🙁
Nothing has changed over the last few days except me plugging it back in
- You must be logged in to reply to this topic.