Zanussi integrated microwave door.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi integrated microwave door.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 12, 2016 at 8:39 am #88089
    aqualectric
    Participant

    Zanussi integrated microwave Model:- ZBM26542XA. PNC 947608587

    Appliance dead – found 8A fuse on the mains input PCB had blown. Replaced it; tested it several times – all worked fine. Now has gone dead again after customer opened and shut the door. (machine wasn’t running at the time) Looked at some tech online and it seems the door microswitches could be at fault.
    First question – why and how do these fail? Can’t quite see how they can switch out of sync unless one switch is sticking or slow to respond…..
    Second – can you use ordinary generic 3 tag microswitches or is it best to replace all three or is it best to fit a whole new frame and switches?
    Third – I can’t find the part number for the switch frame just the individual microswitch; but Zanussi don’t state where they fit.
    I don’t normally get involved with microwaves as these days they’re generally not worth fixing. This is the usual dreaded “friend of a friend” job that you somehow get roped into……. 😐

    Any help appreciated!!

    Steve.

    April 12, 2016 at 9:33 am #436980
    Criscold
    Participant

    Re: Zanussi integrated microwave door.

    Hi Steve

    I don’t repair microwaves but I have the manual for this if it helps.

    Colin

    April 14, 2016 at 8:26 am #436981
    aqualectric
    Participant

    Re: Zanussi integrated microwave door.

    Thanks very much Colin – looks more and more like the door microswitches. Will try that first.
    Of course if anyone else has experience of these microwaves, any info is appreciated.

    Thanks again!!


    Steve.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.