- This topic has 3 replies, 2 voices, and was last updated 9 years, 11 months ago by
.
Viewing 4 posts - 1 through 4 (of 4 total)
-
Posts
-
Re: jlwm1604
there are 5 versions of this machine and not all the panels are the same
what is wrong with the panel you have got ?
Dave
Re: jlwm1604
have you checked the board ?
look for a resistor about 50 to 100 ohms on the power in to the board feeds the power supply chip. if resistor blown change that and the chip and should be ok
look in here
simple-pcb-repair-tips-t51155.html
where myself and other members have detailed many machines with a similar fault
Dave
Viewing 4 posts - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.