jlwm1604

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › jlwm1604

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 14, 2016 at 3:35 pm #88115
    eng14
    Participant

    hi guys need a front pcb board for this machine,recon or s/hand,thanks richard. 😀

    April 14, 2016 at 4:44 pm #437044
    electrofix
    Moderator

    Re: jlwm1604

    there are 5 versions of this machine and not all the panels are the same

    what is wrong with the panel you have got ?

    Dave

    April 15, 2016 at 9:13 am #437045
    eng14
    Participant

    Re: jlwm1604

    Display gone machine dead ,dave

    April 15, 2016 at 8:05 pm #437046
    electrofix
    Moderator

    Re: jlwm1604

    have you checked the board ?

    look for a resistor about 50 to 100 ohms on the power in to the board feeds the power supply chip. if resistor blown change that and the chip and should be ok

    look in here

    simple-pcb-repair-tips-t51155.html

    where myself and other members have detailed many machines with a similar fault

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.