Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › indesit freestanding gas cooker thermocouple ?
- This topic has 7 replies, 4 voices, and was last updated 9 years, 11 months ago by
norbellini.
-
AuthorPosts
-
April 16, 2016 at 9:03 am #88125
norbellini
ParticipantI have the above cooker Sorry i cant get the model number without taking it out and disconnecting .It has 4 burners 2 of which at the back have suddenly failed to stay alight ,when i first light them I wondered if it was the thermocouples With them both not working i thought how they were configuered or if they have seperate valves Any suggestions before i start a process of elimanation thanks
April 16, 2016 at 10:15 am #437073kwatt
KeymasterRe: indesit freestanding gas cooker thermocouple ?
Probably just the thermocouples as you suspect but, without a model number impossible to tell you what ones are required.
K.
April 16, 2016 at 10:54 am #437074norbellini
ParticipantRe: indesit freestanding gas cooker thermocouple ?
thanks Its just uncanny how both packed up together I am going to rake the cooker out and get the model and get back to you
April 16, 2016 at 4:00 pm #437075norbellini
ParticipantRe: indesit freestanding gas cooker thermocouple ?
model : Indesit it50g s/n203271023 25750720000 :tup:
April 16, 2016 at 4:20 pm #437076admin
KeymasterRe: indesit freestanding gas cooker thermocouple ?
Hi
Pull he knobs off and then push them back on gently and retry it..Most people use too much force when they turn the gas taps causing them to go past a stop point within the knob.
Bryan
April 16, 2016 at 5:56 pm #437077iadom
ModeratorRe: indesit freestanding gas cooker thermocouple ?
Thermocouple is C00092498.
April 16, 2016 at 6:06 pm #437078kwatt
KeymasterRe: indesit freestanding gas cooker thermocouple ?
Now here:
http://shop.ukwhitegoods.co.uk/c0009249 … ermocouple
K.
April 17, 2016 at 11:37 am #437079norbellini
ParticipantRe: indesit freestanding gas cooker thermocouple ?
r600a wrote:Hi
Pull he knobs off and then push them back on gently and retry it..Most people use too much force when they turn the gas taps causing them to go past a stop point within the knob.
Bryan
just tried that and had some success moved the knobs about and ones that didnt work did and visa versa I have been told by the wife she took em all off to clean them last week .so i need to mess about a bit because the logic of all the same knobs doesnt apply
thanks lads -
AuthorPosts
- You must be logged in to reply to this topic.
