indesit freestanding gas cooker thermocouple ?

Home Forums Public Support Forums Help And Support Cooker And Oven Forum indesit freestanding gas cooker thermocouple ?

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #88125
    norbellini
    Participant

    I have the above cooker Sorry i cant get the model number without taking it out and disconnecting .It has 4 burners 2 of which at the back have suddenly failed to stay alight ,when i first light them I wondered if it was the thermocouples With them both not working i thought how they were configuered or if they have seperate valves Any suggestions before i start a process of elimanation thanks

    #437073
    kwatt
    Keymaster

    Re: indesit freestanding gas cooker thermocouple ?

    Probably just the thermocouples as you suspect but, without a model number impossible to tell you what ones are required.

    K.

    #437074
    norbellini
    Participant

    Re: indesit freestanding gas cooker thermocouple ?

    thanks Its just uncanny how both packed up together I am going to rake the cooker out and get the model and get back to you

    #437075
    norbellini
    Participant

    Re: indesit freestanding gas cooker thermocouple ?

    model : Indesit it50g s/n203271023 25750720000 :tup:

    #437076
    admin
    Keymaster

    Re: indesit freestanding gas cooker thermocouple ?

    Hi

    Pull he knobs off and then push them back on gently and retry it..Most people use too much force when they turn the gas taps causing them to go past a stop point within the knob.

    Bryan

    #437077
    iadom
    Moderator

    Re: indesit freestanding gas cooker thermocouple ?

    Thermocouple is C00092498.

    #437078
    kwatt
    Keymaster

    Re: indesit freestanding gas cooker thermocouple ?

    Now here:

    http://shop.ukwhitegoods.co.uk/c0009249 … ermocouple

    K.

    #437079
    norbellini
    Participant

    Re: indesit freestanding gas cooker thermocouple ?

    r600a wrote:Hi

    Pull he knobs off and then push them back on gently and retry it..Most people use too much force when they turn the gas taps causing them to go past a stop point within the knob.

    Bryan
    just tried that and had some success moved the knobs about and ones that didnt work did and visa versa I have been told by the wife she took em all off to clean them last week .so i need to mess about a bit because the logic of all the same knobs doesnt apply
    thanks lads

Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.