Beko WM6355M Control dial

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Beko WM6355M Control dial

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • May 2, 2016 at 6:02 am #88227
    HillRunner
    Participant

    Hi my partner has a Beko WM6355M washing machine that the control dial is next to impossible to get to the right setting when she is turning it. There is a digital display on the machine and when she wants to turn it to a spin (22 on the display) its basically down to pot luck and she could be there for 5 minutes where the display could range from any number by turning dial. Also the buttons for turning the machine on/off etc are slightly pushed in and is there a way to align them back up?

    May 2, 2016 at 7:37 am #437409
    bazza500
    Participant

    Re: Beko WM6355M Control dial

    It sounds like someone has pushed the buttons too hard and dislodged the circuit board from its clips.

    May 2, 2016 at 3:52 pm #437410
    HillRunner
    Participant

    Re: Beko WM6355M Control dial

    I can fix the buttons but it’s the dial that is temprimental where we can’t get it on to a program.

    May 2, 2016 at 5:35 pm #437411
    Lawrence
    Participant

    Re: Beko WM6355M Control dial

    It’s the switch behind the dial ,also check pcb edge connectors

    May 2, 2016 at 10:07 pm #437412
    HillRunner
    Participant

    Re: Beko WM6355M Control dial

    So you think the dial mechanism has come loose from its housing?

    May 3, 2016 at 8:33 pm #437413
    bazza500
    Participant

    Re: Beko WM6355M Control dial

    If I remember correctly, The dial has a plastic “thingy” behind it that has to be located into the dial the correct way. If this is not located, it will still turn but the program selection will be random.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.