Miele pw6065 overfilling

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Miele pw6065 overfilling

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 12, 2016 at 8:42 pm #88296
    richy
    Participant

    Hi i Have a miele commercial washing machine that overfills until water pours out the soap drawer no blockages in the pressure pipe or holes . The pressure pipe seems to go into what looks like a pressure switch but isnt then out the other side and up onto the main circuit board . the inlet celenoids switch the water off if the power is turned off . not seen this fault before so any help appreciated Thanks Rich

    May 16, 2016 at 3:16 pm #437613
    electrofix
    Moderator

    Re: Miele pw6065 overfilling

    it is suprising it does not fault code out with the time its taking to fill

    check the hose for any leaks. the pressure switch will be the one on the board
    dont know what the other one is but needs to be checked for leaks whatever it is
    if you want to post a picture of it will take a look

    Dave

    May 16, 2016 at 5:13 pm #437614
    admin
    Keymaster

    Re: Miele pw6065 overfilling

    Hi

    Normally it’s the plastic pipe which is at the bottom of the tub under the door seal.Normally full of scum and stopping the pressure switch from working correctly.
    The front of the appliance will need to be opened to access.

    Bryan

    May 16, 2016 at 9:11 pm #437615
    richy
    Participant

    Re: Miele pw6065 overfilling

    Thanks Bryan i did check and no blockages

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.