Whirlpool AZB 7470 Tumble Dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool AZB 7470 Tumble Dryer

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • May 13, 2016 at 11:10 pm #88305
    WhiteVanMan1
    Participant

    This is an import, and the reservoir (vider reservoir) and filter (nettoyer filtre) lights are flashing when set to a programme. Nothing else happening at all. Any ideas please? Cheers. Steve.

    May 14, 2016 at 8:23 am #437629
    electrofix
    Moderator

    Re: Whirlpool AZB 7470 Tumble Dryer

    try this

    set knob to 6 o clock
    press start button 3 times
    click knob 1 click clockwise
    press start 3 times
    turn off wait 5 secs then try it

    Dave

    May 14, 2016 at 9:27 am #437630
    WhiteVanMan1
    Participant

    Re: Whirlpool AZB 7470 Tumble Dryer

    Cheers for that Dave. Do you know what the cause of the problem is? I couldn’t find anything obviously wrong, but was beginning to suspect the dreaded NTC fault. I will try your suggestion and let you know. Steve.

    May 14, 2016 at 9:51 am #437631
    Criscold
    Participant

    Re: Whirlpool AZB 7470 Tumble Dryer

    You have mail

    May 14, 2016 at 3:36 pm #437632
    electrofix
    Moderator

    Re: Whirlpool AZB 7470 Tumble Dryer

    had a whirlool dryer on board a ship do something similar. did the rest and all ok
    from what i can understand if the ambient air is too hot dryer cuts out and you have to get an engineer to reset and then advise on a suitable site
    in my case the door was closed and the compartment got too hot

    Dave

    May 16, 2016 at 9:53 am #437633
    WhiteVanMan1
    Participant

    Re: Whirlpool AZB 7470 Tumble Dryer

    Aha, that makes sense Dave. This dryer was in a small shower room, probably used with the door shut then.
    Cheers
    Steve.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.