- This topic has 2 replies, 3 voices, and was last updated 9 years, 10 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
Re: above washing machine display dead.
I deduced that the display module was faulty, and renewed it as the machine would not switch on.
Using my non contact voltage tester, I found that power was getting to the display module, and that the two wiring multi plugs are fine, so reckoned on a faulty display module.
However, having renewed the above module, the m/c will still not power up!
So, do I now expect a faulty main control module?
jonty
Re: John Lewis WM1411 (Zanussi 914531500)
it does sound likely
was machine completely dead ie is it a board power supply fault ?
Dave
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.