Beko wm5100w fault

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Beko wm5100w fault

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 14, 2016 at 6:14 pm #88568
    Johnnydavie
    Participant

    Hi has anyone came across this problem . My beko has started filling with water and spinning really fast for a few seconds then stops then takes more water and spins fast again . I put it on a test mode and as it went on spin it made a loud bang from underneath . I was going to get a circuit board but have been told it might be the tachometer on the motor .. Can anyone help

    June 14, 2016 at 6:17 pm #438603
    electrofix
    Moderator

    Re: Beko wm5100w fault

    could be tacho or the board either will cause this fault

    Dave

    June 26, 2016 at 11:38 am #438604
    petehall347
    Participant

    Re: Beko wm5100w fault

    i would first check the wiring is intact on the motor . if so remove motor for bench testing . also look for burned boards etc .

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.