Belling Synergie 50/50

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Belling Synergie 50/50

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • April 6, 2005 at 1:09 pm #8878
    becks
    Participant

    Hi,

    I have just moved into my first house.

    There is a built in Belling Synergie 50/50 double oven which unfortunately was very dirty when I moved in.

    After cleaning the inside I noticed that there was a streak of dirt between the two panes of glass and in my wisdom I decided to remove the front piece of glass which propmtly fell on the floor smashing into lots of little pieces.

    Can anyone tell me whether it is possible to get a glass front?

    I can’t find and serial number on the oven and there is no manual – help please.

    thanks Becks

    April 6, 2005 at 1:13 pm #130890
    Martin
    Participant

    Re: Belling Synergie 50/50

    Shouldn’t be a problem (bet Posh was mad with you though eh?) 😀

    Give us the full model number and we can sort out the part you need 8)

    Martin

    April 6, 2005 at 2:17 pm #130891
    becks
    Participant

    Re: Belling Synergie 50/50

    thank you for the very quick response! 😀

    Apologies for being dense but could you suggest where I might find the model number – is it going to be printed on the oven somewhere? 😳

    April 6, 2005 at 7:27 pm #130892
    Dave_Conway
    Participant

    Re: Belling Synergie 50/50

    It should be around the door(s) somewhere Becks

    Dave.

    April 8, 2005 at 10:54 am #130893
    becks
    Participant

    Re: Belling Synergie 50/50

    Slight problem – have located stick on oven (where the seal is) but half of said sticker is missing which I presume contains the relevant information.

    Is this a terminal problem?

    April 8, 2005 at 3:05 pm #130894
    Dave_Conway
    Participant

    Re: Belling Synergie 50/50

    It does contain the information yes but it shouldn’t be terminal.

    So far we know that it’s a Synergie, which I assume is a built in double oven, what colour is it ? Are both ovens exactly the same size, which door is broken, upper or lower ?

    I’ll try and narrow it down a bit if you can answer those for me but I may be back with more questions afterwards 😉

    Dave.

    April 8, 2005 at 4:23 pm #130895
    becks
    Participant

    Re: Belling Synergie 50/50

    Yep is a built in double oven.

    It has two silver strips down each side and the handle is encased in the glass (or at least would be if there was any glass) which is in the middle.

    The doors look to be the same size but will check at home tonight and will confirm.

    It is the lower door which is broken

    thanks

    April 8, 2005 at 4:25 pm #130896
    becks
    Participant

    Re: Belling Synergie 50/50

    just had a thought 😮

    I could take a picture of it with a digital camera and send this – would that help?

    April 8, 2005 at 4:27 pm #130897
    Martin
    Participant

    Re: Belling Synergie 50/50

    becks wrote:just had a thought 😮

    I could take a picture of it with a digital camera and send this – would that help?

    Yes Yes….do send it though to Dave_Conways listed email address not mine OK?

    Martin

    April 11, 2005 at 9:04 am #130898
    becks
    Participant

    Re: Belling Synergie 50/50

    Have just looked on the Belling website and their model number XOU487AL looks exactly like my broken one.

    Hope this helps

    Becks

    April 11, 2005 at 9:48 am #130899
    Dave_Conway
    Participant

    Re: Belling Synergie 50/50

    It really isn’t worth the risk to be honest, if the glass happened to be the wrong one it won’t be returnable and most of them are up around the £50 mark.

    Dave.

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.