Zanussi FJS1025W Dead – Occasional E90 Code

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Zanussi FJS1025W Dead – Occasional E90 Code

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 6, 2005 at 1:14 pm #8879
    admin
    Keymaster

    I started a wash this morning, then took my dad and a neighbour shopping. The machine was half way through a two hour cycle when I left. When I returned, the machine appeared to be off; I opened the door and the clothes are still wringing wet. If I press the skip/reset button, nothing happens. No led lights up above the on/off switch.

    I have had the occasional e90 code beep at me withing 2 minutes of starting a wash in the last couple of months, but after pressing skip/reset, everything seemed to settle down.

    Thanks for any help.
    John

    April 6, 2005 at 1:21 pm #130900
    Martin
    Participant

    Re: Zanussi FJS1025W Dead – Occasional E90 Code

    John,

    Could be a tricky one. E90 represents a Main Circuit Board Configuration Error, so it may be the board. 🙁

    Best get expert help from a local engineer I would say….we may have someone in your area via our :-

    Repairs@

    Martin

    April 6, 2005 at 2:31 pm #130901
    admin
    Keymaster

    Re: Zanussi FJS1025W Dead – Occasional E90 Code

    Thanks Martin,
    I’ve since discovered why the on/off switch didn’t function; the mains circuit had tripped, and I hadn’t noticed.

    The E90 problem crops up occasionally, and I’ll get that sorted locally as you say.

    Once again, thanks for the help.
    John

    April 19, 2005 at 8:28 pm #130902
    admin
    Keymaster

    Re: Zanussi FJS1025W Dead – Occasional E90 Code

    I had an E90 problem and the engineer replaced the wires and plugs which connect the main board (5 blue wires if I remember rightly)

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.