Zanussi FJS1025W Dead – Occasional E90 Code

[admin]

I started a wash this morning, then took my dad and a neighbour shopping. The machine was half way through a two hour cycle when I left. When I returned, the machine appeared to be off; I opened the door and the clothes are still wringing wet. If I press the skip/reset button, nothing happens. No led lights up above the on/off switch.

I have had the occasional e90 code beep at me withing 2 minutes of starting a wash in the last couple of months, but after pressing skip/reset, everything seemed to settle down.

Thanks for any help.
John

[Martin]

Re: Zanussi FJS1025W Dead – Occasional E90 Code

John,

Could be a tricky one. E90 represents a Main Circuit Board Configuration Error, so it may be the board. 🙁

Best get expert help from a local engineer I would say….we may have someone in your area via our :-

Repairs@

Martin

[admin]

Re: Zanussi FJS1025W Dead – Occasional E90 Code

Thanks Martin,
I’ve since discovered why the on/off switch didn’t function; the mains circuit had tripped, and I hadn’t noticed.

The E90 problem crops up occasionally, and I’ll get that sorted locally as you say.

Once again, thanks for the help.
John

[admin]

Re: Zanussi FJS1025W Dead – Occasional E90 Code

I had an E90 problem and the engineer replaced the wires and plugs which connect the main board (5 blue wires if I remember rightly)

[Author]

Posts