Siemens sf24t558gb stuck on Prewash rinse aid light on

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Siemens sf24t558gb stuck on Prewash rinse aid light on

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 1, 2016 at 9:57 am #88937
    Iaind
    Participant

    Hi all,

    Many thanks for any help .

    We have a Siemens dishwasher. It seems to be stuck on Prewash with the rinse aid light permanently on. Was fine yesterday but not this morning! Have reset to no avail and pump is pushing water out down hose.. Any ideas… Perhaps a heater problem of one sort or another?

    August 1, 2016 at 3:07 pm #439836
    Martin
    Participant

    Re: Siemens sf24t558gb stuck on Prewash rinse aid light on

    Can you tell us exactly what happens when you set the ‘Reset’?

    August 2, 2016 at 6:11 am #439837
    Iaind
    Participant

    Re: Siemens sf24t558gb stuck on Prewash rinse aid light on

    Many thanks for the reply

    When I reset it the timer goes from 22 to 0 mins,there is a whering noise ( I presume the pump is cycling) intermittently for just under a minute. It does not switch off at 2 minutes. The prerinse and refill rinse aid lights stay on… That is all that happens!

    Cheers

    Iain

    August 2, 2016 at 7:07 am #439838
    Martin
    Participant

    Re: Siemens sf24t558gb stuck on Prewash rinse aid light on

    OK Iain so it seems the programme resets as it should. The programme LEDs don’t normally go out anyway and the Rinse Aid LED is just indicating that the Rinse Aid needs a refill.

    So, next question, at this point you cannot set any other programme option? If that is the case then that Control Unit is faulty and needs replacing. 🙁

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.