Samsung WF431ABP

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Samsung WF431ABP

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 4, 2016 at 6:13 pm #88963
    rocker
    Participant

    when this machine is filling water is escaping from the soap draw, I have taken the dispenser & drawer out, can’t find any faults, checked the hose to tub, no blockage.
    I even turned the water pressure down, still the same.
    need to know if this is a known problem, bit worried about buying fitting new parts as I don’t know exact cause. John

    August 4, 2016 at 9:02 pm #439909
    Lawrence
    Participant

    Re: Samsung WF431ABP

    is it “Glugging” and coming down the front or seeping around the edges of where the disp top seals to the bottom
    if it Glugs change the disp to tub hose as its not venting itself as it fills
    if its seeping then take the 2 sections apart and seal with Debor

    August 5, 2016 at 6:37 am #439910
    rocker
    Participant

    Re: Samsung WF431ABP

    Hi Lawrence, thanks for reply, It is seeping but I believe its because when drawer is closed its sleeping from the closed joint between the drawer facia & base of dispenser not sealing ! but of course can’t prove that as unable to get visual look. John

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.