Bosch SGS43A22GB/01 Dishwasher overfill

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch SGS43A22GB/01 Dishwasher overfill

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • April 7, 2005 at 9:36 pm #8898
    Simon46
    Participant

    Been to above tonight. Fills till the mushroom in the middle of the cabinet lifts and drains. Checked the float with the magnet moves up and down and is magnetic (no pressure switch)and turned it round just in case. only 18 months old and fault occurs intermittently as per customer. Any ideas?. Is it likely to be board?

    Thanks
    Simon

    April 7, 2005 at 10:00 pm #130994
    Simon46
    Participant

    Re: Bosch SGS43A22GB/01 Dishwasher overfill

    ps have read Eastlmarks post http://www.ukwhitegoods.co.uk/modules.p … 43a22gb+01

    April 7, 2005 at 11:19 pm #130995
    BSH-MAN
    Participant

    Re: Bosch SGS43A22GB/01 Dishwasher overfill

    What is the FD number?

    April 7, 2005 at 11:33 pm #130996
    gegsy
    Participant

    Re: Bosch SGS43A22GB/01 Dishwasher overfill

    Simon46 wrote:Been to above tonight. Fills till the mushroom in the middle of the cabinet lifts and drains. Checked the float with the magnet moves up and down and is magnetic (no pressure switch)and turned it round just in case. only 18 months old and fault occurs intermittently as per customer. Any ideas?. Is it likely to be board?

    Thanks
    Simon

    If you have turned float around, put it back to the light coloured part upwards.
    I have found module to be at fault mostly with the overfill, along with the magnet chaffing on crud.

    Greg

    April 7, 2005 at 11:50 pm #130997
    Simon46
    Participant

    Re: Bosch SGS43A22GB/01 Dishwasher overfill

    FD nr is 8206 BSH man.

    S.

    April 7, 2005 at 11:53 pm #130998
    Simon46
    Participant

    Re: Bosch SGS43A22GB/01 Dishwasher overfill

    Thanks Greg that was my next question.

    S.

    April 8, 2005 at 1:05 pm #130999
    BSH-MAN
    Participant

    Re: Bosch SGS43A22GB/01 Dishwasher overfill

    If the FD is before 8211 (IIRC) then a new module and mushroom float sould be fitted.
    The new module will “time out” on the fill and thus avoid any embarrassing leaks. 😳
    For the record, the factory says the reed switch float should be grey side up. 😉

    April 8, 2005 at 5:40 pm #131000
    Simon46
    Participant

    Re: Bosch SGS43A22GB/01 Dishwasher overfill

    Thanks BSH man. You are a credit to this site. Does the whole assembly have to be fitted or can the mushroom just be changed?

    Cheers
    Simon

    April 8, 2005 at 8:35 pm #131001
    superfix
    Participant

    Re: Bosch SGS43A22GB/01 Dishwasher overfill

    replace both pcb and mushroom together to get job right.

    new logic on pcb is timed fill for wash instead of relying on reed s/w

    April 8, 2005 at 8:42 pm #131002
    gegsy
    Participant

    Re: Bosch SGS43A22GB/01 Dishwasher overfill

    BSH-MAN wrote:For the record, the factory says the reed switch float should be grey side up. 😉

    Sorry grey side up; cleaned enough of them 😳

    Greg

    April 10, 2005 at 7:41 am #131003
    Simon46
    Participant

    Re: Bosch SGS43A22GB/01 Dishwasher overfill

    Similar to the E2 thread on the bosch fridge freezer two module parts are listed on the BSH website. 488155 and 489492(subst). Which is the one to order?

    Regards
    S.

    April 10, 2005 at 9:52 am #131004
    gegsy
    Participant

    Re: Bosch SGS43A22GB/01 Dishwasher overfill

    Simon46 wrote:Similar to the E2 thread on the bosch fridge freezer two module parts are listed on the BSH website. 488155 and 489492(subst). Which is the one to order?

    Regards
    S.

    Hi
    ALWAYS order the substituted part, as this will be a modified/upgraded spare

    Greg

    April 12, 2005 at 7:39 am #131005
    Simon46
    Participant

    Re: Bosch SGS43A22GB/01 Dishwasher overfill

    Thanks Greg.

    S.

  • Author
    Posts
Viewing 13 posts - 1 through 13 (of 13 total)
  • You must be logged in to reply to this topic.