Indesit IWC 8123 All LEDS Flashing

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Indesit IWC 8123 All LEDS Flashing

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 6, 2016 at 6:13 pm #89509
    admin
    Keymaster

    The problem started earlier in the week.
    The wife said that the machine wouldn’t run unless she slammed the loading door.
    I presumed the switch interlock switch would be faulty.
    However, before I’d had time to order one, she pushed it one slam too far, and tripped the ECB.
    Today, I replaced the interlock switch, and found that the plug top fuse had also popped.
    I replaced the fuse and powered up the machine.

    When I put it on a wash program, it will start to take in water, then after about 10 seconds, stops taking in water, starts the pump and all the top level leds are flashing.

    Prior to this episode, it’s been fine. Could anyone shed any light as to what might be going on.
    It runs fine on a spin cycle, and seems to be related to the intake of water.

    October 6, 2016 at 7:01 pm #441579
    admin
    Keymaster

    Re: Indesit IWC 8123 All LEDS Flashing

    It’s looking like the main board

    October 6, 2016 at 7:19 pm #441580
    admin
    Keymaster

    Re: Indesit IWC 8123 All LEDS Flashing

    The logic board has blown.

    Two Caps, a resistor and a transitor at least.

    Whilst I can find another board for not too much money, i could really do with it tomorrow, so it looks like a run to our friendly white goods supplier for a new machine.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.