Indesit IWC 8123 All LEDS Flashing

[admin]

The problem started earlier in the week.
The wife said that the machine wouldn’t run unless she slammed the loading door.
I presumed the switch interlock switch would be faulty.
However, before I’d had time to order one, she pushed it one slam too far, and tripped the ECB.
Today, I replaced the interlock switch, and found that the plug top fuse had also popped.
I replaced the fuse and powered up the machine.

When I put it on a wash program, it will start to take in water, then after about 10 seconds, stops taking in water, starts the pump and all the top level leds are flashing.

Prior to this episode, it’s been fine. Could anyone shed any light as to what might be going on.
It runs fine on a spin cycle, and seems to be related to the intake of water.

[admin]

Re: Indesit IWC 8123 All LEDS Flashing

It’s looking like the main board

[admin]

Re: Indesit IWC 8123 All LEDS Flashing

The logic board has blown.

Two Caps, a resistor and a transitor at least.

Whilst I can find another board for not too much money, i could really do with it tomorrow, so it looks like a run to our friendly white goods supplier for a new machine.

[Author]

Posts