Bosch WFB1605GB/12

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Bosch WFB1605GB/12

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • April 11, 2005 at 8:22 pm #8956
    Phidom
    Participant

    Looked on the BSH Quickfinder site for either drum bearing kit or bearing seal but I can only find the bearing cross, part number 283725. Bearings are 6204 & 6205, seal is 30-52/62. If I can only buy the complete bearing housing the machine is not worth repairing so does anyone offer a bearing kit or seal for these machines?

    Cheers, Phil

    April 11, 2005 at 10:21 pm #131333
    Dave_Conway
    Participant

    Re: Bosch WFB1605GB/12

    Nope, I had the same problem last year with one, the seal was a different size though.

    The closest I can come up with is from Maddocks which is 30 X 52/65 X 10/15

    The “65” being the outer lip which seals the spider to the drum, it should fit I reckon as it’s only 3mm larger in diameter.

    Their part number is 54-ZN-16 priced at the almighty 59p, gotta be worth a shot 😉

    They’re on 01443 842371

    Dave.

    April 12, 2005 at 6:47 am #131334
    Phidom
    Participant

    Re: Bosch WFB1605GB/12

    Many thanks, I will give them a ring. Sounds a bit better than £93.26 for the bearing cross. 🙂

    April 12, 2005 at 7:09 am #131335
    Martin
    Participant

    Re: Bosch WFB1605GB/12

    ….also Masterpart do a Bearing (& seal) Kit to fit this model at £11.99 (their stock code BS05110)


    and it fits the following models too..:-
    WFB1602GB/16, WFB1602GB/22, WFB1602GB/26, WFB1602GB/27, WFB1602GB/30, WFB1602GB/33, WFB1602GB/36, WFB1605GB/11, WFB1605GB/12, WFB1605GB/15, WFB1605GB/16, WFB1605GB/22, WFB1605GB/26, WFB1605GB/27, WFB1605GB/30, WFB1605GB/36, WFB2000GB/03, WFB2000GB/07, WFB2000GB/12, WFB2004GB/15, WFB2004GB/31, WFB2004GB/33, WFB2004GB/36, WFB2005GB/31, WFB2005GB/33, WFB2005GB/36, WFB4000GB/01, WFB4000GB/02, WFB4000GB/07, WFB4001GB/01, WFB4001GB/02, WFB4002GB/01, WFB4002GB/02, WFD2060GB/01, WFD2061GB/01, WFD2070GB/01

    Martin

    April 12, 2005 at 7:24 am #131336
    Dave_Conway
    Participant

    Re: Bosch WFB1605GB/12

    Have you worn your b key out yet Martin ? 😆

    Dave.

    April 12, 2005 at 10:37 am #131337
    Martin
    Participant

    Re: Bosch WFB1605GB/12

    Dave_Conway wrote:Have you worn your b key out yet Martin ? 😆

    bbbbbbbbb….nope, not yet, thank goodness eh? :rotfl:

    Martin

    April 12, 2005 at 11:44 am #131338
    Phidom
    Participant

    Re: Bosch WFB1605GB/12

    How do you make a bearing cross? Smack it a few times with a dirty great lump hammer :clown:

    January 27, 2007 at 10:00 am #131339
    Martin114
    Participant

    Re: Bosch WFB1605GB/12

    Martin wrote:….also Masterpart do a Bearing (& seal) Kit to fit this model at £11.99 (their stock code BS05110)

    Just had a call in for bearings on a WFB4001GB/01. Not done one before – does the bearing spider remove through the back panel or does the tub have to be taken out?

    Cheers
    martin

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.