Hoover DYN7164 310051781227 motor stammer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover DYN7164 310051781227 motor stammer

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • October 18, 2016 at 7:13 pm #89631
    alro
    Participant

    Hi gents
    motor wont rotate no error code shown motor just has a stammer any ideas DC motor in machine rectifier or core board or motor any info would help me please
    cheers alro

    October 18, 2016 at 7:26 pm #441928
    Mo3426
    Participant

    Re: Hoover DYN7164 310051781227 motor stammer

    had one last week were the splines on the drum pulley had stripped giving this effect untill i looked at the back of the machine

    October 18, 2016 at 7:33 pm #441929
    alro
    Participant

    Re: Hoover DYN7164 310051781227 motor stammer

    no checked pulley all ok motor stammers with no belt on
    cheers alro

    October 18, 2016 at 7:58 pm #441930
    kaibart
    Moderator

    Re: Hoover DYN7164 310051781227 motor stammer

    Check rectifier common to go due to overloading if the tracks are ok inspect main pcb or burn Mark’s hope this helps normally more than 1 problem with these dc machines thou.

    October 20, 2016 at 8:39 am #441931
    alro
    Participant

    Re: Hoover DYN7164 310051781227 motor stammer

    hI Gents still need help on this has no rectifier just a core board and DC motor any tech info would help so i can go back and test the machine cheers alro

    October 20, 2016 at 5:46 pm #441932
    kaibart
    Moderator

    Re: Hoover DYN7164 310051781227 motor stammer

    Change module this will sort it for you connect have them in stock 5045382391334

    October 20, 2016 at 5:48 pm #441933
    kaibart
    Moderator

    Re: Hoover DYN7164 310051781227 motor stammer

    You have checked the plug connector to the motor for a wiring fault if so definitely go with module

    November 8, 2016 at 7:17 pm #441934
    alro
    Participant

    Re: Hoover DYN7164 310051781227 motor stammer

    fitted new module still motor make a loud humming noise and stammer or judders but will not rotate what am i missing to check any help please cheers alro insulation on motor tested ok and reading on winding there need to know what reading should be

    November 8, 2016 at 8:22 pm #441935
    kaibart
    Moderator

    Re: Hoover DYN7164 310051781227 motor stammer

    Have you fitted correct module part number for programmed module 49027632 sound like a module faulty to me

    November 9, 2016 at 2:22 pm #441936
    alro
    Participant

    Re: Hoover DYN7164 310051781227 motor stammer

    Yes fitted 49027632 same fault

    November 9, 2016 at 2:26 pm #441937
    Martin
    Participant

    Re: Hoover DYN7164 310051781227 motor stammer

    ……and the motor plug is definately OK is it? Double checked continuity between it and the control module?

    November 11, 2016 at 9:53 pm #441938
    alro
    Participant

    Re: Hoover DYN7164 310051781227 motor stammer

    gents motor faulty fitted new one all ok
    old motor reading same as new motor but it was no good just stammered thank all for replys cheers alro

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.