Lamona oven element query

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Lamona oven element query

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 3, 2016 at 12:19 pm #89757
    HanLouP
    Participant

    I’m needing to replace the element in my Lamona (LAM3600) oven. The actual element doesn’t have any screws to remove it, more like soldered dots?? How is the best way to remove it so I can fit the new element?
    Thanks

    November 3, 2016 at 12:26 pm #442403
    kwatt
    Keymaster

    Re: Lamona oven element query

    If it’s this element:

    https://shop.ukwhitegoods.co.uk/2629000 … en-element

    Most you can do from the front without taking the oven out but, if it’s not got screw heads you’ll likely have to pull the oven out the housing to replace it.

    K.

    November 3, 2016 at 12:41 pm #442404
    HanLouP
    Participant

    Re: Lamona oven element query

    Thank you, yes that’s the element, I’ll try removing the whole oven and see!

    November 3, 2016 at 6:40 pm #442405
    RocketMan
    Participant

    Re: Lamona oven element query

    Its back off job this one. Please ensure it’s turned off and you use another means (voltage stick or a meter to confirm it’s safe) to check it’s safe.

    The edges are very sharp

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.