DIPLOMAT ADP8102

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › DIPLOMAT ADP8102

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • April 13, 2005 at 4:19 am #8981
    MARTINSKI
    Participant

    HI ALL, FIRST TIME POSTER, GO EASY ON ME !!

    DISHWASHER JUST OVER 3 YEARS OLD. WASHER WOULDNT DRAIN AND NO HOT WATER. DOES THE WATER NEED TO REACH A CERTAIN TEMP. FOR THE TIMER TO MOVE ON TO THE NEXT CYCLE? TIMER STICKS AT ROUND ABOUT 12-13 ON THE TIMER CYCLE. HAVE TRIED RESETING IT WITH NO JOY. ANY HELP/ADVICE WOULD BE MOST APPRECIATED.

    REGARDS
    MARTINSKI. 🙄

    April 13, 2005 at 6:31 am #131468
    Dave_Conway
    Participant

    Re: DIPLOMAT ADP8102

    Yes, it needs to heat to the correct temperatre before the timer will advance.

    It sounds like the heater overload thermostat has cut out, they are manually resettable.

    Please ensure the plug is pulled beforehand though :zap:

    Dave.

    April 13, 2005 at 2:59 pm #131469
    MARTINSKI
    Participant

    Re: DIPLOMAT ADP8102

    Thanks for the prompt reply Dave, cheers.
    Could you tell me where and how to reset the thermo. as this is all new to me, and yes I will pull the plug beforehand 😆 :zap:

    April 13, 2005 at 3:36 pm #131470
    Dave_Conway
    Participant

    Re: DIPLOMAT ADP8102

    I can’t go in to specifics I’m afraid due to EU legislation.

    Neddless to say, it’s near the heater 😉

    Dave.

    April 13, 2005 at 11:20 pm #131471
    MARTINSKI
    Participant

    Re: DIPLOMAT ADP8102

    Could you give hint i.e. is it accesible from inside or underneath washer?
    🙄 hope i`m not getting you in (hot water) over this 😆

    Great help so far
    Cheers Dave.

    April 13, 2005 at 11:34 pm #131472
    Penguin45
    Participant

    Re: DIPLOMAT ADP8102

    Small white box, red button, underneath. Power off……….

    The provisional flipper of
    Penguin45.

    April 13, 2005 at 11:35 pm #131473
    MARTINSKI
    Participant

    Re: DIPLOMAT ADP8102

    Cheers big boy 😉

    April 13, 2005 at 11:39 pm #131474
    Penguin45
    Participant

    Re: DIPLOMAT ADP8102

    Big boy? :rotfl: :rotl: . Penguins are not noted for their vertical triumphs!

    But, thanks.

    Power off first…….

    Penguin45.

    April 13, 2005 at 11:52 pm #131475
    MARTINSKI
    Participant

    Re: DIPLOMAT ADP8102

    :clown: Cheers !!!

    April 14, 2005 at 12:37 am #131476
    MARTINSKI
    Participant

    Re: DIPLOMAT ADP8102

    Right in about things now, does the small switch have two grey wires and is situated bottom right ?? with piece of polystyrene attached to the trip ??

    Thanks in advance
    Martin. 😛

    April 14, 2005 at 2:57 am #131477
    MARTINSKI
    Participant

    Re: DIPLOMAT ADP8102

    😥 Thought i had found heater overload thermo. but i dont think so going by your description.
    How close is it to the pump ?
    Cant find the red reset button, had bottom tray off , is it hidden by a cover ?
    Helllppp !! :haier:

    April 14, 2005 at 7:34 am #131478
    Dave_Conway
    Participant

    Re: DIPLOMAT ADP8102

    It’ll look something like that 😉

    Dave.

    April 14, 2005 at 2:28 pm #131479
    admin
    Keymaster

    Re: DIPLOMAT ADP8102

    Hi guys,
    Can you tell me the colour coding on the wires so that i can pinpoint the reset button, all “clues” are most appreciated.
    I wont be defeated !!! :tup:
    Cheers
    Martin.

    April 15, 2005 at 1:17 am #131480
    MARTINSKI
    Participant

    Re: DIPLOMAT ADP8102

    Anyone know the wire colour coding for the thermo reset ??

    :worthy:
    Martinski.

  • Author
    Posts
Viewing 14 posts - 1 through 14 (of 14 total)
  • You must be logged in to reply to this topic.