Hotpoint EW81G Cooker Hob Wiring Diagram

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint EW81G Cooker Hob Wiring Diagram

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 14, 2016 at 2:38 pm #89858
    jontymox
    Participant

    Good afternoon,

    Wondering if someone can assist with a problem wiring a replacement L/H/F hob regulator?

    Essentially I have purchased an EGO regulator (ELE4123) from Connect Distribution, which has some different terminal assignations.

    Only four connections are used; on the original a single red was connected to Terminal 2, a single red to P1 an insulated black to 4A and a non insulated black to another 4A

    On the replacement unit I have connected a single red to Terminal 2, the other red to P1, and am unsure about the remaining two black connections, as the remaining Terminals are P2, Pilot, and Terminal 4, and do not wish to take chances with their correct positions.


    jonty

    November 15, 2016 at 9:26 am #442780
    electrofix
    Moderator

    Re: Hotpoint EW81G Cooker Hob Wiring Diagram

    http://www.ukwhitegoods.co.uk/downloads … wiring.pdf

    will this help

    Dave

    November 15, 2016 at 5:16 pm #442781
    jontymox
    Participant

    Re: Hotpoint EW81G Cooker Hob Wiring Diagram

    Thanks Dave,

    Yes, that helped… the exact EGO regulator wasn’t listed, but was close enough to ascertain that I had a neutral connection incorrect.

    Thanks again,

    jonty

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.