Hoover VHC681B

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › Hoover VHC681B

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 19, 2016 at 11:38 am #89899
    Levenfields
    Participant

    Need to fit felt seal front duct. what do I have to do to access felt ridge? :eeek:

    November 19, 2016 at 7:09 pm #442942
    kaibart
    Moderator

    Re: Hoover VHC681B

    Hi his job means dismantling the front of the dryer I would call someone in to do it unless you have done something like this before.

    November 29, 2016 at 5:32 pm #442943
    Levenfields
    Participant

    Re: Hoover VHC681B

    I can do it if you advise me where to take off front of machine

    November 29, 2016 at 8:42 pm #442944
    kaibart
    Moderator

    Re: Hoover VHC681B

    Ok safety 1st unplug machine remove lid 3 screws at the back and the plastic sides then there are 2 screws holding the console on,then remove door then there are 4 screws holding the front panel on,and 1 each end at the bottom of the front panel then you have 4 7mm screws to remove front panel there are 2 wires on the door lock of front panel to and then your where you need to be, I still advise you to have someone who knows how to do this as it a big job,and I wount be able to help you further regards kai

    November 30, 2016 at 11:54 am #442945
    Levenfields
    Participant

    Re: Hoover VHC681B

    Thank you will have a possible look at this.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.