Beko Tumble Dryer small belt DSV64W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko Tumble Dryer small belt DSV64W

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 27, 2016 at 8:59 pm #90206
    M1
    Participant

    Beko Tumble Dryer small belt DSV64W

    This dryer has a small belt about 10 cm in diameter that goes to the motor pulley and then to a larger pulley, whitch then the drum belt fits on, to drive the drum.

    Anyone know how to stretch this belt and fit it. I have tried all standard methods.
    Put the belt in Boiling wtare, stretched it for 24 hours used screwdrivers to try and manipulate it on the pulleys.

    The problem is the two pulleys are so close together you can’t slip anthing around the pulley like a socket or pipe like the usualy way of fitting tight stretchable belts.

    Anyone managed this.

    Thanks

    December 27, 2016 at 9:53 pm #444040
    kaibart
    Moderator

    Re: Beko Tumble Dryer small belt DSV64W

    If your fitting the small belt the motor has to come out,if your fitting the main belt the motor lifts from bottom of top on the spring kai

    December 29, 2016 at 7:34 pm #444041
    M1
    Participant

    Re: Beko Tumble Dryer small belt DSV64W

    I managed it today with two spoons (handles to lever belt around pulley) shall I keep spoons on the van ?
    Maybe some bicycle tyre levers :}

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.