miele w3830 washing machine-fill light flashing

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › miele w3830 washing machine-fill light flashing

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 18, 2017 at 1:34 pm #90367
    Latham63
    Participant

    Stops on rinse with the fill light flashing +3 dashes on the display.
    Have checked the pressure bowl,cleaned & tightened filter .
    the inlet valve checks ok.
    Wondering if the water direction mechanism on top of the soap box is faulty?

    January 19, 2017 at 8:54 am #444566
    Latham63
    Participant

    Re: miele w3830 washing machine-fill light flashing

    The check inlet normaly means not filling in time or at all.
    Being as water comes in on the wash cycle ok,& I can`t manually select rinse on this machine,can only assume there may be a blockage in the soap box device which changes the flow when the rinse cycle is reached?

    January 19, 2017 at 6:01 pm #444567
    clivejameson
    Participant

    Re: miele w3830 washing machine-fill light flashing

    Does it let in any water at all on the rinse and does this one have an aquastop? I did have one some time ago that was giving a very slow fill (water pressure was a bit marginal) and it would time out intermittently…new aquastop doubled the flow rate despite the low pressure. Could be it times out with the higher level of rinse?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.