Faulty Premier Range PR98.8M Extractor

Home › Forums › Public Support Forums › Help And Support › Other Appliances › Faulty Premier Range PR98.8M Extractor

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 24, 2017 at 12:02 pm #90419
    mprobbins
    Participant

    I have a Premier Range PR98.9M extractor that has stopped working. The lights all work fine but when a button is pressed to turn on the extractor, the unit beeps a couple of times and the lights go out. It sounds like it is trying to reset itself.
    I would really like to get this unit fixed than have to buy a new one.
    Can anyone advise if they have any experience of this issue and what needs to be replaced to fix it?
    Thanks

    January 24, 2017 at 12:11 pm #444727
    kwatt
    Keymaster

    Re: Faulty Premier Range PR98.8M Extractor

    Sadly we’ve no info on these products as explained here:

    http://www.ukwhitegoods.co.uk/help/abou … mier-range

    Personally, I wouldn’t expect a lot of support I’m afraid. 🙁

    K.

    April 14, 2017 at 9:16 am #444728
    jimca007
    Participant

    Re: Faulty Premier Range PR98.8M Extractor

    lots of these cooker hoods are made by either CATA ( appleson ) or TEKA and they all suffer from premature motor failure. a lot of the time its the thermal fuse on the motor coil which you can purchase from RS components and replace if you wanted to give it a bash , check the control PCB for try joints too often the relay contacts can need resoldered.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.