Britannia SI-11XGC-SLK-K Range Oven Timer Dead

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Britannia SI-11XGC-SLK-K Range Oven Timer Dead

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 23, 2017 at 1:21 pm #90670
    jontymox
    Participant

    Good afternoon everyone,

    Wondering if I could obtain a wiring diagram, and/or advice on the above range ovens’ dead timer?

    I deduced that the original timer was faulty, as power is getting to the unit but not working.

    However, I have renewed the timer and it remains dead.

    There are only two lives, and three neutral connections related to the timer, and I’m unsure where to check next…

    Kind regards,

    jonty

    February 24, 2017 at 7:19 pm #445561
    jontymox
    Participant

    Re: Britannia SI-11XGC-SLK-K Range Oven Timer Dead

    Is it difficult/possible to power up the timer to ensure the new unit is not dud?

    Seriously struggling with this problem…

    jonty

    February 24, 2017 at 9:10 pm #445562
    SWERV
    Participant

    Re: Britannia SI-11XGC-SLK-K Range Oven Timer Dead

    I would check the connections on the terminal block. I had one that was exactly the same and it turned out to be a poor contact in the terminal block.

    Merv

    February 25, 2017 at 8:20 am #445563
    jontymox
    Participant

    Re: Britannia SI-11XGC-SLK-K Range Oven Timer Dead

    will do,

    thank you

    March 2, 2017 at 3:37 pm #445564
    jontymox
    Participant

    Re: Britannia SI-11XGC-SLK-K Range Oven Timer Dead

    Just an update to say i found a broken neutral wire in the loom.

    Regards,

    jonty

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.