Spares for Candy Hob PL330

Home › Forums › Public Support Forums › Spare Parts Help › Spares for Candy Hob PL330

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • April 18, 2005 at 7:45 pm #9086
    E
    Participant

    I have an old (10 yrs +) Candy Hob, model no. PL330 (4 electric plates) and one of the plates has just stopped working. Is it possible to get spares for this hob? Cheers, Ian.

    April 18, 2005 at 8:49 pm #132064
    Dave_Conway
    Participant

    Re: Spares for Candy Hob PL330

    Yes, you can still get the spares.

    It will most likely be the switch that controls the plate if it just stopped working, that is around the £35 mark, the plates can be replaced by universal types at around £25 each.

    If you need an engineer to check for you, check repairs@ and the directories, if you’re going to have a go yourself, disconnect it 1st from the supply ! :zap:

    Dave.

    April 18, 2005 at 10:34 pm #132065
    E
    Participant

    Re: Spares for Candy Hob PL330

    thanks dave. can you point me towards a supplier for these parts? mail order if possible.

    ian.

    April 18, 2005 at 10:56 pm #132066
    Penguin45
    Participant

    Re: Spares for Candy Hob PL330

    They will all be available through the spares@ part of this site. If they are not actually in the shop, an eMail to spares@ukwhitegoods.com will quickly find what you want.

    Regards,
    Penguin45.

    April 20, 2005 at 4:14 pm #132067
    E
    Participant

    Re: Spares for Candy Hob PL330

    hi.

    seems i cannot return the switch part if i don’t use it. how can i be sure that the problem is the switch rather than the plate itself?

    i am happy to try and test the circuit if i can, but should i be looking for any physical damage?

    is there any way i can test the plate to see if it requires replacing before i order the parts? i presumke i can measure heating element resistance?

    Ian.

    April 20, 2005 at 6:38 pm #132068
    Penguin45
    Participant

    Re: Spares for Candy Hob PL330

    Correct – power off first……… Your multimeter can also be used to check whether the regulator is switching or not.

    Regards,
    Penguin45.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.