Bosch Exxcel high low heat connections

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › Bosch Exxcel high low heat connections

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 9, 2017 at 9:14 am #91409
    robti
    Participant

    Hi I have the above type. SP601/51
    E-NR.WTA4108GB/03. FD8604000857

    So I disconnected the spade connectors from the heater on the drum to change the belt without marking where they went, reconnected and everything seems to be working but I can’t be sure about the low heat when I press the button if it actually is low heat.

    So is there anyway to test this out multimeter on spades or anything ?

    Thanks

    June 9, 2017 at 10:35 am #447971
    electrofix
    Moderator

    Re: Bosch Exxcel high low heat connections

    dont see how you can get the element connections wrong as there are only 2 connections

    high and low heat is controlled by the thermostats

    Dave

    June 9, 2017 at 1:31 pm #447972
    robti
    Participant

    Re: Bosch Exxcel high low heat connections

    Thanks for that, okay it might have been the thermostats that I disconnected 3 or 4 wires with a loop between them,

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.